Dishwasher Flooding

The standard dishwasher is a modern-day convenience may of us utilize with a great degree of satisfaction. This economical water-saver offers much relief when it comes to daily chores. In fact, Energy-Star rated dishwashers use, on average, as little as three gallons of water per load. On the other hand, washing dishes by hand consumes up to 27 gallons of water per load! Modern appliances like the handy dishwasher are a built-in time saver as well as an environmentally friendly machine.

Dishwashers, like most kitchen appliances, are built to last. Many offer years upon years of convenience. On occasion, these dependable appliances have a tendency to leak or break, causing utter devastation within the kitchen. not only is the automatic dishwashing convenience temporarily halted, but the damage that results can be an expensive fix.

Problems with a Broken Dishwasher

The suds and dirty water that leak from a broken dishwasher can seep into your kitchen floorboards within minutes. Mold growth occurs within as little as 24 hours. So, unless you detect the flood sooner rather than later, you’re in for a costly cleanup.

Periodically inspecting your dishwasher for leaks or potential problems is a tedious task, but one that will save you significant labor expenses and, perhaps, a high-cost replacement.

How to Prevent a Broken Dishwasher

The dishwasher is a tidy and prim device, with all the central hoses and components tucked neatly away inside. The appliance seems relatively uncomplicated. Checking your dishwasher takes a little familiarity with its inner workings. So, where do you begin?

Inspect the Gasket

What is a gasket? The gasket is a rubber lining that keeps the suds and water from leaking out of your dishwasher anytime it operates. Easily check the functionality of the gasket with, first a visual inspection for any obvious wear, and second, a piece of paper. Close the dishwasher door upon the paper. If the paper can be easily removed when the door is closed, a tight seal is not in place. Replace the gasket in this instance.

Notice the Water Level

In general, an operational dishwashers water level will remain at the lowest part of the dishwasher door. Upon running the dishwasher, if you notice the water level to be higher than the edge of the door when you open it just prior to the wash cycle, the float switch could be damaged; or food particles may have clogged the strainer. Simply, remove the strainer and thoroughly rinse it to remove any debris. If the water level continues to be high replace the float switch.

Examine Both Hoses

Dishwashers come equipped with two hoses, one that fills and one that drains. Prior to inspecting the hoses, be sure to turn off the power to the dishwasher from the breaker box. You can check the hoses by removing the lower panel of your dishwasher. If you see any traces of wetness, the hoses may be too worn to operate efficiently. Significant water damage is likely to result over the long run. An additional method to check for the functionality of the hoses is to place a piece of paper underneath the hoses. If the paper becomes wet or saturated at any point, replace both hoses. Also check for and undo any kinks in the hose.

What to do about a Flooded Dishwasher

An unexpected leak may spring if you do not perform periodic checks of the dishwashers internal mechanisms. Soapy suds that spread along the kitchen floor leave more than watery puddles to clean up. Developing mold spores are a cause for concern. Plus, in no way is it safe to step onto a wet kitchen floor with a malfunctioning electrical appliance. The combination of electricity and water is extremely dangerous. All is not lost, when you are aware of the steps necessary to remediate the sudden mechanical failure.

Turn Off the Electricity

First, turn off the electricity to the kitchen. This safety precaution ensures that leaking water and electricity do not mix. Advise your family that the kitchen is off limits until the dishwasher is safe to use once again.

Shut Off the Water

A quick reaction is necessary to prevent additional water damage to the flooring or paneling of surrounding cabinets in your kitchen. Find the waterline that works in conjunction with your dishwasher. You’ll likely locate this under the kitchen sink. Turn the valve completely clockwise to shut off the water to the dishwasher. Once the water source is turned off, take this time to examine the cause of the flooded dishwasher.

Mop up Excess Water

Soak up any water that leaked onto your hardwood flooring, kitchen tiles or surrounding cabinetry. Hardwood flooring and wooden cabinets absorb water easily, creating a risky environment that encourages mold growth or discoloration and damage to surfaces, including swelling and warping. Swift action can prevent mold spores from contaminating the space, as well as reduce other unfavorable conditions.

Call a Professional

Once water seeps deep into the kitchen flooring and cabinets, the resulting damage is difficult to remediate without professional help. Water damage restoration professionals are trained and experienced in all facets of water extraction and drying. Reputable companies, like PRS, are immediately available to eliminate the standing floodwater that easily and effortlessly penetrates surfaces. Advanced water-extraction machinery is the most effective method used by trusted water damage restoration experts to thoroughly dry water damaged areas, furnishings and structures.

When your dependable dishwasher suddenly interrupts your peace of mind with an unexpected leak, water damage restoration experts are a phone call away. Service technicians are available 24 hours a day in the event of emergencies to thoroughly remediate the results of any and all water damage.

Source: Luke Armstrong. “Dishwasher Flooding: How to Prevent and React.” Web blog post. Restoration guides, Restoration Master.

Signs Of Hidden Water Leaks In Your Bathroom

Bathroom leaks can be tricky and hard to detect, especially if you don’t know what you’re looking for. Puddles left on the floor after a shower or bath can seem innocent enough, especially if you have children. You may need to poke around to find the not-so-obvious bathroom plumbing leak.

Look for these somewhat subtle signs to determine whether you need to hire a plumber to fix those leaking pipes or plumbing fixtures before things get worse. If left untreated, a water leak in you bathroom can cost you, expecially if it leads to serious water damage to walls, flooring and paint.

Mildew or Mold

No matter how well and how often you clean your bathroom, mold or mildew can spring up if you have a hidden water leak. Mold thrives on moist, dark areas, and a pipe, which is typically hidden in a wall or under flooring, provides the perfect starting point for mold or mildew if the pipe springs a leak.

While it’s normal for a little mildw to occur wherever water accumulates, such as in the corner of a shower, mold or mildew on non shower walls or in corners of the bathroom is a clear sign that water is leaking somewhere and finding its way close to those areas. A leaking pipe provides plenty of moisture so the longer it takes you to detect and fix the leak, the easier and faster mold will grow.

Damaged paint or wallpaper

Wall damage from toilet leak.

A wall with blistering paint or wallpaper is another sign of bathroom leaks.

In most cases, steam from the occasional hot shower shouldn’t cause paint or wallpaper to come loose. When water and moisture get between the wall and paint, they eliminate the bond and begin to separate the two, causing the paint to rise from the wall and fall off in pieces. The same goes for wallpaper: The adhesive used to bond the paper to the wall becomes less sticky and the paper begins to come loose.

Damaged Walls

Tile damage from leak in shower. Mold in wall board behind tile.

A wall that is warped or stained for no reason is a clear sign that you have a plumbing leak in your bathroom.

When drywall is exposed to moisture, it becomes soft and begins to bubble, ultimately warping and breaking into pieces. If the leak reaches the ceiling, it causes it to sag and possibly leak some of the water that has accumulated. The same goes for the wall board behind tiles; once water has penetrated and moisture can accumulate, the tiles will begin to come loose and fall off.

To fix the leak, a plumber often must tear out the drywall, requiring someone to patch and paint or retile when the plumber is finished.

Damaged flooring

Unless you purposely let water sit on it, a bathroom floor rarely suffers water damage unless there is a leak. If your bathroom floor is buckling, cracking or beginning to stain for no obvious reason, chances are hidden water is the culprit. The water could be from a pipe directly underneath the floor, or it could have traveled there from another area.

Depending of the type of flooring in your bathroom, moisture can make it feel spongy or soft. Tile may lose its adhesion and become loose, allowing you to easily remove a piece and possibly expose water or moisture underneath it. You will also often find a damp subfloor.

Stains on ceilings

If you have a bathroom on a second floor, you might spot a leak in the ceiling under the bathroom. Check the patch of ceiling in the room directly beneath the bathroom for stains and signs of water damage. However, because water can travel a long distance, it’s possible to find water stains on the ceiling farther away.

An occasional wet floor in a second-story bathroom won’t cause enough seepage to damage anything underneath it. Any brown, copper or dark stain on the ceiling is a sign of a pernicious water leak in the ceiling. A sagging ceiling is a sign that water from a leak is reaching the area.

sources: J.T. Gonzales. Signs Of Hidden Water Leak In Your Bathroom. Web blog post. Solution Center: Plumbing. Angie’s List.

The Difference Between Mold and Mildew

Mold in interior of window https://www.prs24hr.com

Mold and mildew are both types of fungi that are commonly found in the home. They thrive in moist environments, spread easily, and live on various surfaces which makes them very difficult to get rid of. If left unattended, however, the harmful microorganisms can quickly affect large areas of your property and may even result in health problems and structural damage. While the two types of fungi share many common features, they pose different risks and respond to different treatment.

So, in order to come up with an efficient cleaning strategy and ensure the safety of your living environment, you need to understand the difference between mold and mildew.

What Is The Difference Between Mold And Mildew?

Common Mildew Types

Primarily, mildew is a plant disease that causes great damage to crops and plants. It is classified as powdery and downy:

  • Powdery mildew mainly affects flowering plants and first appears as white or gray patterned splotches that gradually become yellowish brown or black as the fungus grows.
  • Downy mildew is commonly found in agricultural products, such as grapes and potatoes. Its appearance varies depending on the type of surface it grows on, but usually downy mildew starts as yellow spots that eventually turn brown.

Common Mold Types

Although the number of mold species that can live indoors exceeds 10,000 according to the latest CDC estimates, most household molds belong to one of the following five types. (Picture and description to the right.)

  • Penicillium spores can spread very easily and have strong musty odors.
  • Alternaria under prolonged exposure can cause allergic reactions and asthma attacks.
  • Aspergillus is the most common type of mold found indoors. It can cause allergic reactions and respiratory infections, as well as inflammation of the lungs in those with weak immune systems.
  • Unlike many other molds, Cladosporium can grow in cool areas.
  • Stachybotrys chartarum is the most dangerous kind of household mold – it produces toxic compounds called mycotoxins that can cause severe health problems, such as allergic symptoms, breathing problems, asthma attacks, chronic sinus infections, fatigue and depression. Usually grows around areas that are constantly damp.

How To Tell The Diffence Between MoldAnd Mildew?

There are several crucial differences in the appearance and properties of mold and mildew that will help you recognize the type of indoor fungi you have discovered in your home

Visual differences between mold and mildew https://www.prs24hr.com

Differences between Mold and Mildew in Appearance

Typically, mold appears black or green while mildew looks gray or white. Yet, there are some more detailed specifics on the appearance of the fungi:

  • Mildew usually grows in a flat pattern and appears either powdery or fluffy. It can be easily identified as a patch of white, gray or yellowish fungus that is lying on the surface of a moist area. Mildew usually turns black or brown over time.
  • Mold is usually fuzzy or slimy in appearance. It appears as irregularly shaped spots that can have different colors – blue, green, yellow, brown, gray, black or white. Oftentimes, surfaces that are covered in mold begin to rot.

Differences in the Effects of Mold and Mildew

Both Mold and mildew need to be taken care of in a quick and efficient manner as they can cause a lot of trouble over time:

  • Mildew usually affects plants and crops. If it develops indoors, however, it can also pose health risks. When inhaled, mildew spores cause coughing, headache, sore throat and respiratory problems.
  • Mold can result in considerable structural damage when left unattended for a long time. Prolonged exposure can cause a variety of health problems, depending on the strain of mold. Common health effects of mold include various allergic reactions (sneezing, skin irritations, irritation of the eyes and throat, nasal congestion, ect.), respiratory problems (difficulty breathing, coughing, pneumonia, asthma attacks), heart problems, migraines, inflammation and pain in the joints, dizziness, depression and extreme fatigue. The mycotoxins produced by black mold are particularly harmful and may have severe long-term health effects, especially in younger kids and individual with weak immune systems.

Mold and Mildew Testing

If you are not sure what type of fungi you are dealing with, you can have them tested:

  • Home testing – the easiest way to identify the kind of microorganisms in you home is to drip a few drops of household bleach on the affected area. Wait for about five minutes and inspect the spot:
  1. If it has become lighter, you are dealing with mildew
  2. If it remains dark, it is mold that has developed in your home

You can also use various mold and mildew testing kits that are available on the market:

  • Professional testing – if you suspect considerable mold growth in your property or if you aren’t sure about the best course of action to take, your best bet is to ask for professional assistance. Contact a trustworthy mold removal company in your area for inspection, testing, evaluation and efficient mold removal services that will help you get rid of the harmful fungi in your home.

How To Get Rid Of Mold And Mildew?

If you can prevent mold and mildew in the first place, you’ll save yourself a lot of hassle and headaches.

How to Prevent Mold and Mildew

The most efficient way to prevent mold and mildew in your home is to keep all the areas dry and moisture-free. Maintain a humidity level of about 40-50% inside the house (a dehumidifier provides the most advantageous solution for ensuring appropriate indoor humidity), have your heating and cooling systems regularly inspected, keep air ducts clean and in good condition ensure good air circulation inside the premises, fix any leaks in the bathroom, kitchen or other areas, ect. Remove any mildew-affected plants and weeks as soon as you notice them in order to prevent mildew infestation.

How to Clean Mold and Mildew

Mildew is a surface fungus that can be efficiently treated with a commercially available cleaner and a scrubbing brush. Just make sure you work in a well-ventilated area and wear a facial mask to prevent inhaling mildew spores, as well as to avoid breathing in fumes given off by the cleaning product you use. It is also advisable to put on rubber gloves in order to protect your hands both from the mildew and from the cleaning agent. Clean all the surrounding areas carefully as well, to ensure that all the fungi have been successfully removed.

Mold, on the other hand, attaches to the affected materials with microscopic filaments that penetrate beneath the surface. The mold spore spread very easily and can survive in extreme conditions, so they can quickly affect large areas of your property and result in permanent damage. Moreover, despite its characteristic musty smell, mold is only visible to the eye when the colonies start growing, so early detection and prevention is very difficult. Worst of all, mold can have a very negative impact on your health, so DIY removal attempts are not recommendable. Beside, DIY remedies are very rarely efficient because the fungus usually grows in area that are very difficult to access and to treat.

The safest and most efficient way to get rid of a mold problem is to call a mold remediation company. An experienced professional will come to your home to assess the situation and determining the type of mold or mildew in your property, as well as the extent of the damage. Then, the most appropriate actions will be taken to remove the harmful fungi and prevent its appearance in the near future. The experts will help ensure not only the safety of your living environment, but also your peace of mind.

Have a professional detect and determine mold in your home https://www.prs24hr.com
Have a professional clean mold in your home https://www.prs24hr.com

http://Luke Armstrong. “Mold Vs. Mildew: The Main Differences Between Mold And Mildew” Web blog post. mold Removal, Restoration Master

https://www.facebook.com/ProfessionalRestorationServicesOfTampaBayInc/

Why Should You Hire a Licensed Contractor?

Being a licensed contractor in Florida is a privilege. Many do not understand the difference in being licensed and why some are not licensed. Obtaining and keeping your contracting license in Florida is expensive and there are requirements you must meet. An unlicensed company is taking the easy and unethical approach to assisting those in need.

Licensed or Unlicensed – Is It a Big Deal?

When you are in need for repairs questions run through your head: What does it mean to be licensed? Why are some contractors licensed and some are not? Does it really matter? Being a licensed contractor means they have passed all required testing, met the minimum experience level of four years, passed a credit and background check, and they must carry insurance to cover liability and workers compensation.

Risks of Hiring an Unlicensed Contractor:

  • No insurance – No liability: An unlicensed contractor typically is uninsured – you unlicensedmay end up being liable for personal or financial injuries to others. If they happen to damage your property, there is no insurance to cover that.
  • Poor qualifications and poor quality work: Unlicensed contractors usually do not have the education or qualifications required of a licensee. Therefore, they usually do poor quality work and do not finish the project, leaving the homeowner to pick up the pieces.
  • Possible criminal background: Unlicensed contractors also pose the threat for having a lengthy list of criminal history. This list may include violent crime, sexual offenses, substance abuse, fraud, and/or theft. Do you want someone like that working on your private property?
  • Scam artists: Unlicensed contractors often disappear after taking your money. The department cannot discipline an unlicensed person or help you with any recovery of repairs or money lost. These con artists usually try to scam those in need or urgent repairs such as hurricane damage.
  • Not covered under homeowner’s policy: Most homeowner policies require any repairs be done by a licensed individual.
  • Limited resources for broken contracts: If you have a dispute with a licensed contractor, you have rights and are able to contact the department who will take disciplinary action. However, this action is not available if the contractor is not licensed.
  • Noncompliance with building codes: Most projects require permits and inspections, unlicensed contractors usually ignore such things. If your project isn’t permitted or doesn’t comply with the building code you may have to remove or repair the work at your own expense and be subject to fines.

Before you agree to any repairs confirm the individual is licensed and has insurance. Below are helpful links for you to use:

Click here to verify a Pinellas County license

Click here to verify a State license

Why Hire a Licensed Contractor?

  •  A licensed person has the required education, experience, insurance and qualifications to obtain a license.  They must pass a competency examination before practicing.hire a liecensed contractor
  • Licensed individuals are screened for prior criminal history.
  • The department can discipline and even revoke a license if the person does not live up to professional standards.  This is a not a total safeguard, but is a strong incentive for the licensee to do good work.
  • You may be able to sue the licensee in civil court for problems related to the work done.

Why Should You Hire PRS?

PRS logoProfessional Restoration Services of Tampa Bay, Inc. holds 4 state licenses, multiple certifications and the experience to get the job done right. We strive for customer satisfaction and believe in ethical work. We are dedicated to people in need and we are available 24/7 365 days a year to assist you. We are certified to handle all stages of home restoration. Please take a look at our licenses and certifications below:

State Certified Building Contractor CBC #1258546
State Certified Mold Assessor #MRSA236
State Certified Mold Remediation Contractor #MRSR102
State Certified Home Inspector #HI907
State Certified Radon Measurement Technician #R2257
Crime & Trauma Scene Clean-Up
BBB Accredited Business
CMI #79154, CMRC #79178, WRT/ FSRT #135042
Clean Trust Certified Firm #187012 (formerly IICRC)
EPA Lead-Safe Certified Firm, Lead-Safe Renovator #NAT-50994-1
FEIN# 270863221
Knight of Columbus
Community Associations Institute member

Water Damage and Mold Remediation

Water is essential in our everyday lives, however, it also can be destructive. Water can cause costly repairs for any property owner and can diminish the value of your property. Water damage can originate from a number of sources such as bad weather to a broken pipe. If your property experiences any kind of water damage it is always safe to contact a certified professional water damage restoration specialist. It is also wise to always do your research to make sure the restoration specialist your contacting is actually certified and is able to tackle all of your needs.
Helpful Tips about Water Damage
Water damage is both dangerous and expensive. Water damage can lead to mold and mildew growth. Mold can be undetected at first and can begin to grow as early as 48 hours if water is not removed properly. Below is a list of helpful tips about water damage:
  • Prompt action is vital if unwanted water floods your home.  It will only take minutes for water damage to begin and losses to incur. Contacting a certified water damage restoration specialist would be ideal in this situation.
  • You should always carefully examine your homeowner’s insurance policy to insure that you are covered for flood damage and get the specifics on what they do and do not cover. Please note: Most homeowner’s insurance policies DO NOT cover flood damage.
  1. Water damage coverage and flood damage coverage are two different things.Water Damage: Understanding what types of water damage are covered by your homeowners insurance and how to file a claim are essential when calling Florida your home. Water damage is considered to occur when water damages your home before the water comes in contact with the ground.
  2. Flood Damage: Generally, damage caused by water that has been on the ground at some point before damaging your home is considered to be flood damage.
  • It is important to note that flood insurance and homeowners insurance do not duplicate coverage for water damage. Instead, they complement each other.
  • Should you have any questions contact an attorney or if your claim is being denied
  • Contacting your insurance agent to file a claim, separating damaged property from undamaged property and documenting evidence of the water damage are vital steps to take.

Restoration Services
Hiring a certified restoration specialist that specializes in water damage restoration and mold remediation can save you from health issues and more stress down the road. Attempting to repair a home by yourself that has water damage can result in injury and costly mistakes. Do your homework before hiring anyone to look at your home. The first 24-48 hours are the most crucial in mitigating property losses. Your home needs to be dried properly in an urgent matter to prevent secondary damages from occurring. When water damage or flooding occurs water can be trapped in hard to reach areas of your home. Hiring a restoration specialist that is equipped with proper equipment is essential in assuring that your structure is dried properly.
What is Water Damage Restoration and Mold Remediation?
Both water damage restoration and mold remediation are important processes when it comes to your home and experiencing any kind of unwanted water. Water damage restoration is the process of restoring a property back to pre-loss condition after sustaining any level of water damage. Water damage restoration is needed from a small leak to a flooded road rushing into your home. When your property experiences any kind of water damage mold usually follows right behind the water. Even when you think you have cleaned up all visible water and everything is dry there may still be water invisible to the human eye that leaked into a crack.
Mold growth is a result to an over exposure to moisture. Given the right conditions mold will grow and will grow quickly. Hiring a certified restoration professional that is licensed to assess mold is not only smart for the value of your home but most importantly your health. Once mold is assessed the process of remediation needs to take place. Mold Remediation is the process of solving the source and removing the mold. Again, it is just as important to insure that you are hiring a licensed mold remediation professional as it is for water damage restoration.  Proper equipment and knowledge is key when it comes to treating and removing mold from your home.
Water Damage Restoration and Mold Remediation by PRS
When in or near the Tampa Bay area, you can always trust PRS to provide quick response and efficient handling of all of your water damage needs. Professional Restoration Services of Tampa Bay, Inc.  is duly licensed by the government to perform such activities. We are licensed in Mold Remediation #MRSR102 and Mold Assessor #MRSR236. Mold Remediation license is a privilege given to PRS because of the system and technology they are able to provide.  We are also equipped with the latest technology in thermal imaging. We have the capacity of identifying water sources and areas of trapped moisture that are not visible to the human eye. If a home has water damage a combination of structural drying and thermal imaging is the most efficient way to treat the damage. We are fully equipped to provide both of those services.
We are available 24/7 to assist you when disaster strikes. PRS can automatically bill your insurance company or we do accept a credit card if the loss isn’t covered by insurance. The faster we mitigate and dry your property, the faster things go back to normal.