Dishwasher Flooding

The standard dishwasher is a modern-day convenience may of us utilize with a great degree of satisfaction. This economical water-saver offers much relief when it comes to daily chores. In fact, Energy-Star rated dishwashers use, on average, as little as three gallons of water per load. On the other hand, washing dishes by hand consumes up to 27 gallons of water per load! Modern appliances like the handy dishwasher are a built-in time saver as well as an environmentally friendly machine.

Dishwashers, like most kitchen appliances, are built to last. Many offer years upon years of convenience. On occasion, these dependable appliances have a tendency to leak or break, causing utter devastation within the kitchen. not only is the automatic dishwashing convenience temporarily halted, but the damage that results can be an expensive fix.

Problems with a Broken Dishwasher

The suds and dirty water that leak from a broken dishwasher can seep into your kitchen floorboards within minutes. Mold growth occurs within as little as 24 hours. So, unless you detect the flood sooner rather than later, you’re in for a costly cleanup.

Periodically inspecting your dishwasher for leaks or potential problems is a tedious task, but one that will save you significant labor expenses and, perhaps, a high-cost replacement.

How to Prevent a Broken Dishwasher

The dishwasher is a tidy and prim device, with all the central hoses and components tucked neatly away inside. The appliance seems relatively uncomplicated. Checking your dishwasher takes a little familiarity with its inner workings. So, where do you begin?

Inspect the Gasket

What is a gasket? The gasket is a rubber lining that keeps the suds and water from leaking out of your dishwasher anytime it operates. Easily check the functionality of the gasket with, first a visual inspection for any obvious wear, and second, a piece of paper. Close the dishwasher door upon the paper. If the paper can be easily removed when the door is closed, a tight seal is not in place. Replace the gasket in this instance.

Notice the Water Level

In general, an operational dishwashers water level will remain at the lowest part of the dishwasher door. Upon running the dishwasher, if you notice the water level to be higher than the edge of the door when you open it just prior to the wash cycle, the float switch could be damaged; or food particles may have clogged the strainer. Simply, remove the strainer and thoroughly rinse it to remove any debris. If the water level continues to be high replace the float switch.

Examine Both Hoses

Dishwashers come equipped with two hoses, one that fills and one that drains. Prior to inspecting the hoses, be sure to turn off the power to the dishwasher from the breaker box. You can check the hoses by removing the lower panel of your dishwasher. If you see any traces of wetness, the hoses may be too worn to operate efficiently. Significant water damage is likely to result over the long run. An additional method to check for the functionality of the hoses is to place a piece of paper underneath the hoses. If the paper becomes wet or saturated at any point, replace both hoses. Also check for and undo any kinks in the hose.

What to do about a Flooded Dishwasher

An unexpected leak may spring if you do not perform periodic checks of the dishwashers internal mechanisms. Soapy suds that spread along the kitchen floor leave more than watery puddles to clean up. Developing mold spores are a cause for concern. Plus, in no way is it safe to step onto a wet kitchen floor with a malfunctioning electrical appliance. The combination of electricity and water is extremely dangerous. All is not lost, when you are aware of the steps necessary to remediate the sudden mechanical failure.

Turn Off the Electricity

First, turn off the electricity to the kitchen. This safety precaution ensures that leaking water and electricity do not mix. Advise your family that the kitchen is off limits until the dishwasher is safe to use once again.

Shut Off the Water

A quick reaction is necessary to prevent additional water damage to the flooring or paneling of surrounding cabinets in your kitchen. Find the waterline that works in conjunction with your dishwasher. You’ll likely locate this under the kitchen sink. Turn the valve completely clockwise to shut off the water to the dishwasher. Once the water source is turned off, take this time to examine the cause of the flooded dishwasher.

Mop up Excess Water

Soak up any water that leaked onto your hardwood flooring, kitchen tiles or surrounding cabinetry. Hardwood flooring and wooden cabinets absorb water easily, creating a risky environment that encourages mold growth or discoloration and damage to surfaces, including swelling and warping. Swift action can prevent mold spores from contaminating the space, as well as reduce other unfavorable conditions.

Call a Professional

Once water seeps deep into the kitchen flooring and cabinets, the resulting damage is difficult to remediate without professional help. Water damage restoration professionals are trained and experienced in all facets of water extraction and drying. Reputable companies, like PRS, are immediately available to eliminate the standing floodwater that easily and effortlessly penetrates surfaces. Advanced water-extraction machinery is the most effective method used by trusted water damage restoration experts to thoroughly dry water damaged areas, furnishings and structures.

When your dependable dishwasher suddenly interrupts your peace of mind with an unexpected leak, water damage restoration experts are a phone call away. Service technicians are available 24 hours a day in the event of emergencies to thoroughly remediate the results of any and all water damage.

Source: Luke Armstrong. “Dishwasher Flooding: How to Prevent and React.” Web blog post. Restoration guides, Restoration Master.

Signs Of Hidden Water Leaks In Your Bathroom

Bathroom leaks can be tricky and hard to detect, especially if you don’t know what you’re looking for. Puddles left on the floor after a shower or bath can seem innocent enough, especially if you have children. You may need to poke around to find the not-so-obvious bathroom plumbing leak.

Look for these somewhat subtle signs to determine whether you need to hire a plumber to fix those leaking pipes or plumbing fixtures before things get worse. If left untreated, a water leak in you bathroom can cost you, expecially if it leads to serious water damage to walls, flooring and paint.

Mildew or Mold

No matter how well and how often you clean your bathroom, mold or mildew can spring up if you have a hidden water leak. Mold thrives on moist, dark areas, and a pipe, which is typically hidden in a wall or under flooring, provides the perfect starting point for mold or mildew if the pipe springs a leak.

While it’s normal for a little mildw to occur wherever water accumulates, such as in the corner of a shower, mold or mildew on non shower walls or in corners of the bathroom is a clear sign that water is leaking somewhere and finding its way close to those areas. A leaking pipe provides plenty of moisture so the longer it takes you to detect and fix the leak, the easier and faster mold will grow.

Damaged paint or wallpaper

Wall damage from toilet leak.

A wall with blistering paint or wallpaper is another sign of bathroom leaks.

In most cases, steam from the occasional hot shower shouldn’t cause paint or wallpaper to come loose. When water and moisture get between the wall and paint, they eliminate the bond and begin to separate the two, causing the paint to rise from the wall and fall off in pieces. The same goes for wallpaper: The adhesive used to bond the paper to the wall becomes less sticky and the paper begins to come loose.

Damaged Walls

Tile damage from leak in shower. Mold in wall board behind tile.

A wall that is warped or stained for no reason is a clear sign that you have a plumbing leak in your bathroom.

When drywall is exposed to moisture, it becomes soft and begins to bubble, ultimately warping and breaking into pieces. If the leak reaches the ceiling, it causes it to sag and possibly leak some of the water that has accumulated. The same goes for the wall board behind tiles; once water has penetrated and moisture can accumulate, the tiles will begin to come loose and fall off.

To fix the leak, a plumber often must tear out the drywall, requiring someone to patch and paint or retile when the plumber is finished.

Damaged flooring

Unless you purposely let water sit on it, a bathroom floor rarely suffers water damage unless there is a leak. If your bathroom floor is buckling, cracking or beginning to stain for no obvious reason, chances are hidden water is the culprit. The water could be from a pipe directly underneath the floor, or it could have traveled there from another area.

Depending of the type of flooring in your bathroom, moisture can make it feel spongy or soft. Tile may lose its adhesion and become loose, allowing you to easily remove a piece and possibly expose water or moisture underneath it. You will also often find a damp subfloor.

Stains on ceilings

If you have a bathroom on a second floor, you might spot a leak in the ceiling under the bathroom. Check the patch of ceiling in the room directly beneath the bathroom for stains and signs of water damage. However, because water can travel a long distance, it’s possible to find water stains on the ceiling farther away.

An occasional wet floor in a second-story bathroom won’t cause enough seepage to damage anything underneath it. Any brown, copper or dark stain on the ceiling is a sign of a pernicious water leak in the ceiling. A sagging ceiling is a sign that water from a leak is reaching the area.

sources: J.T. Gonzales. Signs Of Hidden Water Leak In Your Bathroom. Web blog post. Solution Center: Plumbing. Angie’s List.

The Difference Between Mold and Mildew

Mold in interior of window https://www.prs24hr.com

Mold and mildew are both types of fungi that are commonly found in the home. They thrive in moist environments, spread easily, and live on various surfaces which makes them very difficult to get rid of. If left unattended, however, the harmful microorganisms can quickly affect large areas of your property and may even result in health problems and structural damage. While the two types of fungi share many common features, they pose different risks and respond to different treatment.

So, in order to come up with an efficient cleaning strategy and ensure the safety of your living environment, you need to understand the difference between mold and mildew.

What Is The Difference Between Mold And Mildew?

Common Mildew Types

Primarily, mildew is a plant disease that causes great damage to crops and plants. It is classified as powdery and downy:

  • Powdery mildew mainly affects flowering plants and first appears as white or gray patterned splotches that gradually become yellowish brown or black as the fungus grows.
  • Downy mildew is commonly found in agricultural products, such as grapes and potatoes. Its appearance varies depending on the type of surface it grows on, but usually downy mildew starts as yellow spots that eventually turn brown.

Common Mold Types

Although the number of mold species that can live indoors exceeds 10,000 according to the latest CDC estimates, most household molds belong to one of the following five types. (Picture and description to the right.)

  • Penicillium spores can spread very easily and have strong musty odors.
  • Alternaria under prolonged exposure can cause allergic reactions and asthma attacks.
  • Aspergillus is the most common type of mold found indoors. It can cause allergic reactions and respiratory infections, as well as inflammation of the lungs in those with weak immune systems.
  • Unlike many other molds, Cladosporium can grow in cool areas.
  • Stachybotrys chartarum is the most dangerous kind of household mold – it produces toxic compounds called mycotoxins that can cause severe health problems, such as allergic symptoms, breathing problems, asthma attacks, chronic sinus infections, fatigue and depression. Usually grows around areas that are constantly damp.

How To Tell The Diffence Between MoldAnd Mildew?

There are several crucial differences in the appearance and properties of mold and mildew that will help you recognize the type of indoor fungi you have discovered in your home

Visual differences between mold and mildew https://www.prs24hr.com

Differences between Mold and Mildew in Appearance

Typically, mold appears black or green while mildew looks gray or white. Yet, there are some more detailed specifics on the appearance of the fungi:

  • Mildew usually grows in a flat pattern and appears either powdery or fluffy. It can be easily identified as a patch of white, gray or yellowish fungus that is lying on the surface of a moist area. Mildew usually turns black or brown over time.
  • Mold is usually fuzzy or slimy in appearance. It appears as irregularly shaped spots that can have different colors – blue, green, yellow, brown, gray, black or white. Oftentimes, surfaces that are covered in mold begin to rot.

Differences in the Effects of Mold and Mildew

Both Mold and mildew need to be taken care of in a quick and efficient manner as they can cause a lot of trouble over time:

  • Mildew usually affects plants and crops. If it develops indoors, however, it can also pose health risks. When inhaled, mildew spores cause coughing, headache, sore throat and respiratory problems.
  • Mold can result in considerable structural damage when left unattended for a long time. Prolonged exposure can cause a variety of health problems, depending on the strain of mold. Common health effects of mold include various allergic reactions (sneezing, skin irritations, irritation of the eyes and throat, nasal congestion, ect.), respiratory problems (difficulty breathing, coughing, pneumonia, asthma attacks), heart problems, migraines, inflammation and pain in the joints, dizziness, depression and extreme fatigue. The mycotoxins produced by black mold are particularly harmful and may have severe long-term health effects, especially in younger kids and individual with weak immune systems.

Mold and Mildew Testing

If you are not sure what type of fungi you are dealing with, you can have them tested:

  • Home testing – the easiest way to identify the kind of microorganisms in you home is to drip a few drops of household bleach on the affected area. Wait for about five minutes and inspect the spot:
  1. If it has become lighter, you are dealing with mildew
  2. If it remains dark, it is mold that has developed in your home

You can also use various mold and mildew testing kits that are available on the market:

  • Professional testing – if you suspect considerable mold growth in your property or if you aren’t sure about the best course of action to take, your best bet is to ask for professional assistance. Contact a trustworthy mold removal company in your area for inspection, testing, evaluation and efficient mold removal services that will help you get rid of the harmful fungi in your home.

How To Get Rid Of Mold And Mildew?

If you can prevent mold and mildew in the first place, you’ll save yourself a lot of hassle and headaches.

How to Prevent Mold and Mildew

The most efficient way to prevent mold and mildew in your home is to keep all the areas dry and moisture-free. Maintain a humidity level of about 40-50% inside the house (a dehumidifier provides the most advantageous solution for ensuring appropriate indoor humidity), have your heating and cooling systems regularly inspected, keep air ducts clean and in good condition ensure good air circulation inside the premises, fix any leaks in the bathroom, kitchen or other areas, ect. Remove any mildew-affected plants and weeks as soon as you notice them in order to prevent mildew infestation.

How to Clean Mold and Mildew

Mildew is a surface fungus that can be efficiently treated with a commercially available cleaner and a scrubbing brush. Just make sure you work in a well-ventilated area and wear a facial mask to prevent inhaling mildew spores, as well as to avoid breathing in fumes given off by the cleaning product you use. It is also advisable to put on rubber gloves in order to protect your hands both from the mildew and from the cleaning agent. Clean all the surrounding areas carefully as well, to ensure that all the fungi have been successfully removed.

Mold, on the other hand, attaches to the affected materials with microscopic filaments that penetrate beneath the surface. The mold spore spread very easily and can survive in extreme conditions, so they can quickly affect large areas of your property and result in permanent damage. Moreover, despite its characteristic musty smell, mold is only visible to the eye when the colonies start growing, so early detection and prevention is very difficult. Worst of all, mold can have a very negative impact on your health, so DIY removal attempts are not recommendable. Beside, DIY remedies are very rarely efficient because the fungus usually grows in area that are very difficult to access and to treat.

The safest and most efficient way to get rid of a mold problem is to call a mold remediation company. An experienced professional will come to your home to assess the situation and determining the type of mold or mildew in your property, as well as the extent of the damage. Then, the most appropriate actions will be taken to remove the harmful fungi and prevent its appearance in the near future. The experts will help ensure not only the safety of your living environment, but also your peace of mind.

Have a professional detect and determine mold in your home https://www.prs24hr.com
Have a professional clean mold in your home https://www.prs24hr.com

http://Luke Armstrong. “Mold Vs. Mildew: The Main Differences Between Mold And Mildew” Web blog post. mold Removal, Restoration Master

https://www.facebook.com/ProfessionalRestorationServicesOfTampaBayInc/

What Is Mold Remediation?

Mold remediation is the process of removal and/or cleanup of mold from an indoor environment. There are several steps to this process.

mold removal

 

 

humidistatHow do I know if mold is a problem in my home?  Mold is a type of fungus that is present in our natural environment. Mold spores, which are tiny microscopic ‘seeds’, can be found virtually everywhere including inside homes. It takes 24-48 hours for mold to start to grow. Mold only needs something to attach itself to, food and moisture to grow. High humidity levels inside of a home can cause mold. You can check the humidity level inside your home by purchasing an indoor humidity monitor. You can keep humidity levels down by purchasing a humidistat. This will work in place of your thermostat.
The temperature inside of your home has nothing to do with mold growth. Humidity is the culprit. If you cannot see the mold or smell it but you are experiencing worsening allergy-like symptoms you might have mold. Controlling excess moisture is the key to preventing and stopping indoor mold growth. Mold can be on clothing, on or behind furniture, on walls, on the underside of wallpaper and can even get into the building’s support structure. The longer the mold has been present and growing the greater the extent of the damage.

 

Why does my home need mold remediation?
sneezing asian young womanBesides wanting to remove the musty odor caused by mold there are health effects from exposure to mold that can vary greatly depending on the person and the amount of the mold in their home. Improper cleanup can cause the problem to go away temporarily and cause more damage. The type of health symptoms that may occur include coughing, wheezing, nasal and throat conditions. People with asthma or allergies who are sensitive to mold may notice their asthma or allergy symptoms worsen. Individuals who have weak or compromised immune system, like the elderly, small children and those who are already ill are at risk of developing serious fungal respiratory infections if they are exposed to a moldy environment. Mold should be removed by a certified mold remediator that has the proper equipment and skill to get the job done right.

 

PRS logo (2)Who is qualified to do mold remediation? If you are in need of a mold professional you should do your research and verify they are a state certified mold remediator. A certified mold professional has met all state requirements and has completed the proper training to hold a mold remediator license. Professional Restoration Services of Tampa Bay, Inc. is licensed to assess and to perform mold remediations in the state of Florida. PRS is also a licensed building contractor and they are able to perform the job from start to finish.

If you have a mold problem give PRS a call today! 727-NO-WATER

What You Should Know About Water Damage

For many in the Tampa Bay Area, dealing with water damage is a mountainous task. This is further compounded by the fact that not many people can tell the difference between water damage caused by blackwater, greywater or clean water. There is a huge difference between the damage caused by the different kinds of water. It pays to have knowledge about water damage as you may soon find yourself dealing with water damage, especially if you live in the Tampa Bay area.

Flooding Tampa Bay

Failure to properly clean up a spill in your home will in most cases lead to more water damage and result in mold as well as other-moisture related complications. Bear in mind that water damage could easily extend health issues to you and your family members.  Respiratory issues, itchy eyes and sore throats are some of the health risks related to mold exposure. Water damage to your home needs to be taken seriously.

Various Forms of Water Damage

Water damage Model

 

Blackwater is very dangerous and you should always use caution when coming in contact with this type of water damage. This type of water is not only unsanitary, but corrosive as well. Blackwater hosts very destructive bacteria, fungi and blood borne pathogens that could cause serious illnesses. Blackwater damage could be the result of a broken sewage pipe, flooded streams as well as stagnant water.

Black water damage

 

Second in line is greywater. This type of water damage is also hazardous because it comes with different contaminants, all which could easily damage your property and pose risks to your health. Greywater is common in toilets, washing machines and also from dishwashers.

Finally, we have water damage resulting from clean water. Clean water damage could be the result of a broken water pipe resulting in flooding within the interior areas of your home. Although water damage resulting from clean water is mild compared to blackwater or greywater, it can be costly and could also cause health problems.

Most of the water damaged items in your home will usually comprise of those made from porous material, which will readily absorb water. Such items include: drywall, carpet, wall insulation, rugs, etc. Other factors which further contribute to water damage consist of flaws in the house structure as well as other accidental leaks.

Water Damage Handled by PRS

 

IMG_3572

If you live in the Tampa Bay area and suffer from water damage, you need an able team of professionals that will deal with your problem adequately. Made up of qualified and experienced experts, PRS is a company that will give you peace of mind even during a chaotic flood or water damage to your home. Water damage needs to be dealt with the moment it occurs. In this regard, we provide a fast response the moment you place a call with us. This greatly reduces any further damage as well as limiting health risks to you and your loved ones.

Preventing Mold and Humidity – Don’t Reach For Your Thermostat

It is a common misconception to people that running your air conditioner will prevent mold in your home and keep humidity levels down. Excessive humidity levels can promote mold growth. Humidity levels over 60% is all mold needs to grow. Mold needs water to survive. Humidity is water in a vapor form. If you can maintain humidity levels below 60% you can keep mold from growing. It is important to understand and know the facts especially if you experience water damage. 

 



While an air conditioner does dehumidify a room while it is running, it is only concerned with temperature, not moisture. Once the thermostat reaches the temperature you set it at, it shuts off, regardless of the humidity level in the room. Temperature and humidity have nothing to do with one another. 

 Using A Dehumidistat to Prevent Mold and Humidity 

To prevent moisture and humidity in your home you can purchase a dehumidistat or a thermostat with a built-in dehumidistat that controls humidity. With a dehumidistat you select your desired humidity level. The air conditioner will kick on whenever humidity levels exceed your preset humidity setting. However, this may result in a more expensive energy bill every month. A dehumidistat will cause your AC to run often if you live in a very humid state such as Florida. 

Preventing Mold and Humidity with a Dehumidifier

The other option you have to bring humidity levels down would be to purchase a dehumidifier. These are great for those that are concerned with conserving energy. The dehumidifier does not add cool air to bring down the humidity like the AC does. A dehumidifier is more of a slow and steady approach to reducing humidity in your home unlike the AC unit which is either full on or full off. The result is a comfortable house year round that uses less power. 

 

Be sure to monitor and dump the collection tray often. Once the tray becomes full the built-in float switch will shut the unit off. It will no longer work until emptied. The ideal set up would be to install a drain line off the dehumidifier directly into a sink, outdoor through a wall or hard piped into an existing drain. Then the unit could be left unattended and continue to work as it purges regularly. 

 

Ways to Reduce Humidity  

  • Never leave windows open in high humid environments as this can promote mold growth.
  • Maintain your HVAC system. Change air filters regularly and get professional service once a year to clean the coils.
  • Use bathroom exhaust fans to remove excess humidity after showers.
  • Route exhaust fans (dryer, bathroom ventilation, stove top exhaust, etc.) completely outside of the home, not into any part of the home. 
  • Minimize indoor house plants.
  • Make sure your property is dried properly if you experience a leak or water damage.
  • Seal windows properly to prevent condensation on the glass. Condensation becomes humidity as it evaporates. 

How Can PRS Prevent Mold and Humidity?

If you experience water damage or a leak, time is of the essence. Professional Restoration Services, Inc. is available 24 hours a day 365 days a year to efficiently and properly restore your home to it’s pre-loss condition. With five state licenses, we are the one call does it all company. We have the necessary equipment to ensure your home will be properly dried to prevent mold. In the event you already have mold we are certified to assess and remove the mold as well. We are a certified and reputable company that understands the importance of an immediate response to your loss. 

 

 

Got Mold?

Mold is dangerous to your health and will diminish the value of your home if it goes untreated. Mold is not necessarily always visible, it can grow and live behind walls or even wallpaper. If you have any reason to believe you may have mold, you should have a professional take air samples to determine if you do in fact have a mold issue.

Usually you will smell or see the mold if you have an issue. However, there are times when you do not see or smell the mold. If you or anyone in your home suffers from the common symptoms of mold exposure you should hire a professional immediately to begin assessing your home for mold.

mold on roof

What Are the Common Symptoms of Mold Exposure?

  1. Runny nose and sneezing
  2. Forms of nasal infection and congestion
  3. Respiratory failures
  4. Skin rashes
  5. Throat irritation/infection
  6. Chest pains
  7. Irritated eyes

Mold does not always affect everyone. These symptoms will be more apparent in the elderly, infants or those who suffer from a mold allergy.

mold exposure

Mold Assessing and Remediation

OLYMPUS DIGITAL CAMERA

Do a visual check of your home. You will have to go beyond just the visible areas and look in cabinets, below your kitchen sink and under carpets. Check all areas that are conducive for mold formation. If you do not find any mold but still believe you have mold in your home, you should contact a professional company that is able to assess your home for mold. If you have mold in your home the process of remediation needs to take place to bring your home back to a healthy living environment.

Mold assessment and mold remediation come in tandem. Mold assessment is the process of locating and determining the quantity of mold present in a residential or commercial property. Mold remediation is the process of removing the mold from the structure through intricate processes and techniques.

Mold Remediation by PRS

When in or near the Tampa Bay area, you can always trust PRS to provide the right mold remediation. Professional Restoration Services of Tampa Bay, Inc, PRS is duly licensed by the government to perform such activities. Mold Remediation #MRSR102 license is a privilege given to PRS because of the system and technology they are able to provide.

PRS is a one stop service for restoration. Water and structural damage can be taken care of with a simple call. PRS will also help you with your insurance claims, just what you need to have a complete turnaround on your mold problems.

Water Damage Restoration

If you experience any kind of water damage to your property you need to have your home properly dried out to prevent mold and further damages. Moisture left behind will be a breeding ground for mold to develop. Once you have mold you will have another issue to deal with. Time is of the essence when it comes to water damage. Mold growth can begin within the first 24-48 hours after the water makes contact.

Categories of water damaged summarized in this short video

 

When you are looking for a company to restore your property from water damage make sure they are certified. Look for a company that offers emergency water extraction, structural drying and thermal imaging. Hiring a company that is ill equipped and unskilled can lead to more costly repairs in the future. Be cautious when you are looking for a restoration company.

water in apartment

Thermal Imaging and Structural Drying – Vital Parts of Water Damage Restoration

IMG_2074

When your home experiences a flood or any other type of water damage you need to get the water extracted as soon as possible.  Once the water is extracted thermal imaging plays an important role in detecting the source of a leak and any water that was not extracted. It also is a great tool to have to ensure the job was done correctly when it’s completed. Taking thermal images after the restoration is completed will confirm that all water has been removed from your home.

312 (6)

Structural drying requires the necessary technology, equipment and staff competence to do the work correctly. Structural drying prevents secondary water damage to your property. This includes damages to furniture, books, artwork and mold development. Such damages are brought about by moisture remaining on walls, floors, carpets and furniture. Structural drying does not necessarily include destruction. Structural drying is done thru the use of equipment such as turbo drying fans and dehumidifiers. Accurate thermal imaging and fast structural drying will be able to bring your water damaged property back to its pre-damaged state.

Thermal images 016

Water Damage Restoration by PRS

Professional Restoration Services of Tampa Bay, Inc. has the latest technology in thermal imaging and necessary equipment for structural drying. Efficient drying is a vital part in the restoration process. PRS has the professional capacity to identify wet areas of your property and provide drying efficiently. PRS is available to begin restoration to your home 24 hours, 7 days a week. The faster PRS mitigates and dries your property, the faster things go back to normal. PRS is dedicated to provide honest and efficient service to those in need.

IMG_2134

Why Should You Hire a Licensed Contractor?

Being a licensed contractor in Florida is a privilege. Many do not understand the difference in being licensed and why some are not licensed. Obtaining and keeping your contracting license in Florida is expensive and there are requirements you must meet. An unlicensed company is taking the easy and unethical approach to assisting those in need.

Licensed or Unlicensed – Is It a Big Deal?

When you are in need for repairs questions run through your head: What does it mean to be licensed? Why are some contractors licensed and some are not? Does it really matter? Being a licensed contractor means they have passed all required testing, met the minimum experience level of four years, passed a credit and background check, and they must carry insurance to cover liability and workers compensation.

Risks of Hiring an Unlicensed Contractor:

  • No insurance – No liability: An unlicensed contractor typically is uninsured – you unlicensedmay end up being liable for personal or financial injuries to others. If they happen to damage your property, there is no insurance to cover that.
  • Poor qualifications and poor quality work: Unlicensed contractors usually do not have the education or qualifications required of a licensee. Therefore, they usually do poor quality work and do not finish the project, leaving the homeowner to pick up the pieces.
  • Possible criminal background: Unlicensed contractors also pose the threat for having a lengthy list of criminal history. This list may include violent crime, sexual offenses, substance abuse, fraud, and/or theft. Do you want someone like that working on your private property?
  • Scam artists: Unlicensed contractors often disappear after taking your money. The department cannot discipline an unlicensed person or help you with any recovery of repairs or money lost. These con artists usually try to scam those in need or urgent repairs such as hurricane damage.
  • Not covered under homeowner’s policy: Most homeowner policies require any repairs be done by a licensed individual.
  • Limited resources for broken contracts: If you have a dispute with a licensed contractor, you have rights and are able to contact the department who will take disciplinary action. However, this action is not available if the contractor is not licensed.
  • Noncompliance with building codes: Most projects require permits and inspections, unlicensed contractors usually ignore such things. If your project isn’t permitted or doesn’t comply with the building code you may have to remove or repair the work at your own expense and be subject to fines.

Before you agree to any repairs confirm the individual is licensed and has insurance. Below are helpful links for you to use:

Click here to verify a Pinellas County license

Click here to verify a State license

Why Hire a Licensed Contractor?

  •  A licensed person has the required education, experience, insurance and qualifications to obtain a license.  They must pass a competency examination before practicing.hire a liecensed contractor
  • Licensed individuals are screened for prior criminal history.
  • The department can discipline and even revoke a license if the person does not live up to professional standards.  This is a not a total safeguard, but is a strong incentive for the licensee to do good work.
  • You may be able to sue the licensee in civil court for problems related to the work done.

Why Should You Hire PRS?

PRS logoProfessional Restoration Services of Tampa Bay, Inc. holds 4 state licenses, multiple certifications and the experience to get the job done right. We strive for customer satisfaction and believe in ethical work. We are dedicated to people in need and we are available 24/7 365 days a year to assist you. We are certified to handle all stages of home restoration. Please take a look at our licenses and certifications below:

State Certified Building Contractor CBC #1258546
State Certified Mold Assessor #MRSA236
State Certified Mold Remediation Contractor #MRSR102
State Certified Home Inspector #HI907
State Certified Radon Measurement Technician #R2257
Crime & Trauma Scene Clean-Up
BBB Accredited Business
CMI #79154, CMRC #79178, WRT/ FSRT #135042
Clean Trust Certified Firm #187012 (formerly IICRC)
EPA Lead-Safe Certified Firm, Lead-Safe Renovator #NAT-50994-1
FEIN# 270863221
Knight of Columbus
Community Associations Institute member

Understanding Flood Insurance and Water Damage Coverage

Flood damage is expensive and poses health hazards. Homeowners insurance will not cover you for flood damage. From an insurance companies view flood and water damage are two different things. Your homeowners insurance will deny a water damage claim if the water made contact with the ground prior to entering your home. Knowing your rights and how to obtain flood coverage can avoid this situation.

flood property damage

Flood Damage Coverage and Water Damage Coverage – What’s the Difference?

If water damages your property it will either fall under flood damage or water damage. The question to ask yourself is; did the water that damaged my home make contact with the ground before or after it entered my home?

Flood damage: Water that damages your home after it has already made contact with the flooded homeground.

Examples of flood damage sources:

  • A river overflowing
  • Flooded streets
  • Mudslide
  • Sewer back up caused by a storm

 Water damage: Water that damages your home prior to it making contact with the ground.pipe burst

  • Examples of water damage sources:
  • A broken water pipe spews water into your home
  • Heavy rain causes your roof to leak
  • Rain enters your home through a broken window caused by a storm

Rule of thumb: Flood Insurance and water damage coverage offered under your homeowners insurance policy does not mean you are duplicating coverage. Instead, they complement each other. Click here to learn how to get Flood Insurance.

Understanding Your Coverage and Exclusions

You purchase your homeowner’s insurance and then disaster strikes… do you know what you’re covered for and what damages will be excluded from coverage? Water damage coverage can get read the fine printtricky. It would be an ideal world if we bought one coverage and it covered anything to do with water, however, life is not that simple. For instance, water that backs up through sewers or drains is not covered unless you buy sewer backup coverage separately. Damage from sewer backup would most likely be covered under your flood damage policy. Although, it will be denied if the sewer backup was not caused by a flood in the first place. Insurance companies can deny your water damage claim if you do not file in a timely manner. You must report a water loss within 14 days of the first drop to your insurance company or they could deny your claim. The 14 day rule can complicate a situation such as a water leak that you can’t visibly see.   Such situations can become highly frustrating and unpredictable for the insured.

Useful information about coverage and exclusions:

  • Flood insurance will only apply if either the flood affects two acres of land or it affects two homes, one being yours.
  • Your personal contents may not be covered under a standard flood or water damage policy – get the details!
  • Know the specifics – if a hot water heater springs a leak, the damage should be covered under your homeowners insurance. However, if the hot water heater springs a leak as a direct result of a flood, that would only be covered if you have flood insurance.
  • Mold may not be covered under your homeowner’s policy. Usually with water damage comes mold damage. Know if your policy excludes mold or not.

You can purchase the coverage for personal belongings but usually there is a limit to how much you can cover. Floods and leaky pipes bursting can damage and ruin valuable items. Keeping a list of your valuable items and their worth will make it easier when it comes time to recover money for your losses. Valuable items such as artwork, rare books, jewelry, etc. may fall under a different property coverage limit. There may be a maximum coverage of $2,500.00 for such valuables.

Restoring Your Home and Peace of Mind with PRS

While PRS cannot assist you with your homeowners insurance issues, we can restore your home to pre-loss condition as well provide content restoration services to repair irreplaceable items.  We are certified and licensed to assist you with a complete restoration of your home. We provide services such as: structural drying, mold assessing, mold remediation, complete restoration, and content restoration. We are available 24/7 365 days a year and ready to assist you with an emergency. We know how time sensitive water damage can be, the first 24-48 hours are the most crucial. If you face any water damage to your home we promise to find the source and restore the damages to pre-loss condition.